Admission Requirements
- Students wanting to declare a major in an engineering discipline must be in good academic standing and must have a "C" (2.0) or better in each of the following courses or their equivalents: MAC 2311C, MAC 2312, PHY 2048C, and CHM 2045C or CHS 1440.
- Students wanting to declare a major in an engineering discipline must complete a change of major in the term of completion of the final pending prerequisite course(s) listed above.
Degree Requirements
- Each engineering student is assigned a qualified engineering academic advisor in the department of his/her major. Each student should seek academic advisement before registering for classes each semester to minimize excess hours and to ensure that satisfactory academic progress is being maintained.
- Students in the Industrial Engineering major are expected to make consistent good progress toward their degrees to remain enrolled in, or eligible for, any major in the College of Engineering & Computer Science (CECS) or the College of Optics and Photonics (COP). Therefore, any student majoring in Industrial Engineering who repeats any UCF course and does not earn a grade of "C" (2.0) or better on the second attempt will be placed on Lack of Progress Probation and remain on Lack of Progress Probation as long as the student is enrolled in a CECS or COP major. If a student on Lack of Progress Probation does not receive a grade of "C" (2.0) or better by the third attempt in the same UCF course, the student will be excluded from all CECS and COP majors. Any student majoring in Industrial Engineering who has accumulated 7 or more unsuccessful attempts (i.e., grades below "C" (2.0) and withdrawals) over all courses taken at UCF will be placed on Lack of Progress Probation and remain on Lack of Progress Probation as long as the student is enrolled in a CECS or COP major. If a student on Lack of Progress Probation has a tenth unsuccessful attempt over all courses taken at UCF, the student will be excluded from all CECS and COP majors.
- A student who is excluded from CECS and COP majors may seek readmission to a major in CECS or COP after at least one full year has passed since exclusion. Readmission is not automatic and is dependent upon a high probability of success after readmission. Any student who is readmitted to the Industrial Engineering major will be subject to all probation conditions that applied at the time of exclusion.
This program prepares students for state-regulated professional licensure or certification. For more information on how this program may prepare you in that regard, please view the program.
Degree Requirements
Core Requirements: Basic Level
2 Total Credits
Engineering Core: Basic- Complete all of the following
- The College of Engineering & Computer Science requires all engineering students to achieve a minimum 2.250 GPA in completing the core courses required for the major, together with the restricted electives and senior design courses listed below.
- Complete the following:
- EGS1006C - Introduction to the Engineering Profession (1)
- EGN1007C - Engineering Concepts and Methods (1)
Core Requirements: Advanced Level
60 Total Credits
Courses Required for the Major- Complete all of the following
- The Industrial Engineering and Management Systems department requires all students within the major to achieve a "C" (2.0) GPA or better in all courses in this section with a prefix of EIN, EGS, ESI, STA, MAS, and EGN 3310 and COP 3223C.
- Earn at least 60 credits from the following:
- STA3032 - Probability and Statistics for Engineers (3)
- EIN3351 - Engineering Economic Analysis and Cost Engineering (3)
- ESI3933 - Industrial Engineering Career Faculty Advising
- CAI4823 - Artificial Intelligence for Industrial Engineers (3)
- EIN4243 - Human Engineering (3)
- EIN4333 - Production and Distribution Systems (3)
- EIN4360 - Facilities Planning and Work Design (4)
- EIN4391 - Fundamentals of Digital Manufacturing for Industrial Engineers (3)
- ESI4221 - Empirical Methods for Industrial Engineering (3)
- ESI4234 - Quality Engineering (3)
- ESI4312 - Deterministic Methods for Operations Research (3)
- ESI4313 - Stochastic Methods for Operations Research (3)
- ESI4523 - Systems Simulation (3)
- EIN4517 - Systems Engineering (3)
- EGS4624 - Engineering Innovation and Leadership (3)
- EGN3310 - Engineering Analysis-Statics (3)
- COP3223C - Introduction to Programming with C (3)
- EGN3321 - Engineering Analysis-Dynamics (3)
- EGN3373 - Principles of Electrical Engineering (3)
- EGN3343 - Thermodynamics (3)
- MAS3105 - Matrix and Linear Algebra (4)
- *COP 3223C- Courses with significant programming content in C, C++ or Java may be used to satisfy this requirement but must be approved by the IEMS undergraduate coordinator:
- GEP Course: STA 3032
Restricted Electives
6 Total Credits
- Earn at least 6 credits from the following types of courses: Technical electives are available in the BSIE program to address specific student interests in a variety of technical areas. Students should consult with the departmental academic advisor for a list of the approved technical electives and the terms when specific courses of this type are to be offered.
Capstone Requirements
4 Total Credits
- Complete the following:
- EIN4891C - Industrial Engineering Senior Design Project (4)
Grand Total Credits: 72
Electives
Foreign Language Requirements
Admissions
- Two years of one foreign language in high school, or one year of one foreign language in college (or equivalent proficiency exam) prior to graduation.
Graduation
Additional Requirements
Required Minors
Departmental Exit Requirements
University Minimum Exit Requirements
- A 2.0 UCF GPA
- 42 semester hours of upper division credit completed
- 60 semester hours earned after CLEP awarded
- 30 of the last 39 hours of course work must be completed in residency at UCF.
- A maximum of 45 hours of extension, correspondence, CLEP, Credit by Exam, and Armed Forces credits permitted.
- Complete the General Education Program, the Gordon Rule, and nine hours of Summer credit.
Total Undergraduate Credit Hours Required: 128
Career Advising
The department requires all students in the program to meet with a faculty member for advising on career. This course should be taken during the 3rd year after students have completed STA 3032.
- ESI 3933 - Industrial Engineering Career Faculty Advising Credit Hours: 0
Additional Information
Honors In Major
Related Programs
- Mechanical Engineering (B.S.M.E.)
Certificates
- Engineering Leadership Certificate
Related Minors
- Engineering Leadership Minor
Transfer Notes
- Courses transferred must be formally evaluated for equivalency credit. The student must provide all supporting information with his/her petition for this evaluation.
- EGS 1006C and EGN 1007C are required courses for incoming freshmen only. The credits for these two courses (one hour each) may, with prior approval of the department academic advisor, be moved to area 5. Restricted Electives.
Acceptable Substitutes for Transfer Courses
Program Academic Learning Compacts
- Program Academic Learning Compacts (student learning outcomes) for undergraduate programs are located at: http://www.oeas.ucf.edu/alc/academic_learning_compacts.htm
Equipment Fees
- Part-Time Student: $38 per term
- Full-Time Student: $77 per term
Plan of Study (128 Credit Hours)
- Tentative Course Schedule for Entering Freshmen: The tentative course schedule listed below is a guide for those students who plan on completing their degree in four years. All engineering students should meet with their advisor to develop and maintain an appropriate plan of study.
Freshman Year - Fall (12 Credit Hours)
- ENC 1101 - Composition I Credit Hours: 3
- EGS 1006C - Introduction to the Engineering Profession Credit Hours: 1
- MAC 2311C - Calculus with Analytic Geometry I Credit Hours: 4
- CHS 1440 - Principles of Chemistry Credit Hours: 4 or
- PHY 2048C - General Physics Using Calculus I (or PHY2048 and PHY2048L) Credit Hours: 4
Freshman Year - Spring (12 Credit Hours)
- ENC 1102 - Composition II Credit Hours: 3
- EGN 1007C - Engineering Concepts and Methods Credit Hours: 1
- MAC 2312 - Calculus with Analytic Geometry II Credit Hours: 4
- PHY 2048C - General Physics Using Calculus I Credit Hours: 4
Freshman Year - Summer (9 Credit Hours)
- COP 3223C - Introduction to Programming with C Credit Hours: 3
Select One: (3 Credit Hours)
- ECO 2013 - Principles of Macroeconomics Credit Hours: 3
- ECO 2023 - Principles of Microeconomics Credit Hours: 3
Select One: (3 Credit Hours)
- SPC 1603C - Fundamentals of Technical Presentations Credit Hours: 3
- SPC 1608 - Fundamentals of Oral Communication Credit Hours: 3
Sophomore Year - Fall (14 Credit Hours)
- MAC 2313 - Calculus with Analytic Geometry III Credit Hours: 4
- STA 3032 - Probability and Statistics for Engineers Credit Hours: 3
- GEP Credit Hours: 3
- EGN 3310 - Engineering Analysis-Statics Credit Hours: 3
Sophomore Year - Spring (13 Credit Hours)
- MAP 2302 - Ordinary Differential Equations I Credit Hours: 3
- EGN 3321 - Engineering Analysis-Dynamics Credit Hours: 3
- MAS 3105 - Matrix and Linear Algebra Credit Hours: 4
- EIN 3351 - Engineering Economic Analysis and Cost Engineering Credit Hours: 3
Sophomore Year - Summer (10 Credit Hours)
- GEP Credit Hours: 6
- PHY 2049C - General Physics Using Calculus II (or PHY2049 and PHY2049L) Credit Hours: 4
Junior Year - Fall (13 Credit Hours)
- ESI 4312 - Deterministic Methods for Operations Research Credit Hours: 3
- EGN 3373 - Principles of Electrical Engineering Credit Hours: 3
- EIN 4360 - Facilities Planning and Work Design Credit Hours: 4
- ESI 4221 - Empirical Methods for Industrial Engineering Credit Hours: 3
- ESI 3933 - Industrial Engineering Career Faculty Advising Credit Hours: 0
Junior Year - Spring (12 Credit Hours)
- ESI 4523 - Systems Simulation Credit Hours: 3
- EIN 4333 - Production and Distribution Systems Credit Hours: 3
- EIN 4243 - Human Engineering Credit Hours: 3
- ESI 4313 - Stochastic Methods for Operations Research Credit Hours: 3
Junior Year - Summer (9 Credit Hours)
- GEP Credit Hours: 3
- GEP Credit Hours: 3
- EGN 3343 - Thermodynamics Credit Hours: 3
Senior Year - Fall (12 Credit Hours)
- Approved Technical Elective Credit Hours: 3
- EIN 4391 - Manufacturing Engineering Credit Hours: 3
- ESI 4234 - Quality Engineering Credit Hours: 3
- ESI 4628 - Decision Support Systems for Industrial Engineers Credit Hours: 3
Senior Year - Spring (12 Credit Hours)
- EIN 4891C - Industrial Engineering Senior Design Project Credit Hours: 4
- Approved Technical Elective Credit Hours: 3
- EGS 4624 - Engineering Innovation and Leadership Credit Hours: 3
- EIN 4517 - Systems Engineering Credit Hours: 3